SN74HC7002PWR datasheet by Texas Instruments

SN74HC7002PWR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74HC7002PWR?
  The recommended operating voltage range for the SN74HC7002PWR is 2V to 5.5V, with a typical voltage of 3.3V or 5V.
• How do I handle the power-up and power-down sequencing for the SN74HC7002PWR?
  It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
• What is the maximum frequency of operation for the SN74HC7002PWR?
  The maximum frequency of operation for the SN74HC7002PWR is 100 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure that the SN74HC7002PWR is properly terminated?
  The SN74HC7002PWR requires proper termination to ensure signal integrity and prevent reflections. This can be achieved by using a termination resistor (e.g. 50 ohms) at the output of the device, and ensuring that the transmission line is properly matched to the output impedance of the device.
• What is the maximum output current that the SN74HC7002PWR can sink or source?
  The maximum output current that the SN74HC7002PWR can sink or source is 25 mA per output pin, with a total current limit of 100 mA for all output pins combined.