SN74HC574DW datasheet by Texas Instruments

SN74HC574DW Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that the SN74HC574DW can handle?
  The SN74HC574DW can handle clock frequencies up to 100 MHz.
• How do I ensure that the outputs are in a known state during power-up?
  To ensure that the outputs are in a known state during power-up, connect the OE (output enable) pin to GND or use an external pull-down resistor to force the outputs low during power-up.
• What is the recommended operating voltage range for the SN74HC574DW?
  The recommended operating voltage range for the SN74HC574DW is 2V to 6V, with a typical operating voltage of 5V.
• How do I handle the asynchronous clear (CLR) input?
  The asynchronous clear (CLR) input should be synchronized with the clock signal to ensure proper operation. A low-going pulse on the CLR input will clear the registers, regardless of the clock signal.
• What is the maximum capacitance that can be driven by the SN74HC574DW?
  The SN74HC574DW can drive up to 50 pF of capacitance per output pin.