SN74HC4060PWRG4 datasheet by Texas Instruments

SN74HC4060PWRG4 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74HC4060PWRG4?
  The recommended operating voltage range for the SN74HC4060PWRG4 is 2V to 6V, with a typical voltage of 5V.
• How do I ensure proper power sequencing when using the SN74HC4060PWRG4?
  To ensure proper power sequencing, it is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This helps to prevent unwanted oscillations and ensures reliable operation.
• What is the maximum clock frequency that the SN74HC4060PWRG4 can handle?
  The maximum clock frequency that the SN74HC4060PWRG4 can handle is 30 MHz, although this can vary depending on the specific application and operating conditions.
• How do I handle the reset pin (RST) on the SN74HC4060PWRG4?
  The reset pin (RST) on the SN74HC4060PWRG4 is an active-low input that resets the counter to zero when pulled low. It is recommended to tie the RST pin to VCC through a pull-up resistor if it is not used.
• What is the purpose of the Q15-Q14 pins on the SN74HC4060PWRG4?
  The Q15-Q14 pins on the SN74HC4060PWRG4 are the output pins of the 14-stage binary counter. They provide the binary output of the counter, with Q15 being the most significant bit and Q14 being the least significant bit.