SN74HC374DBR datasheet by Texas Instruments

SN74HC374DBR Frequently Asked Questions (FAQs)

• What is the maximum frequency of operation for the SN74HC374DBR?
  The maximum frequency of operation for the SN74HC374DBR is 100 MHz, but it can vary depending on the specific application and operating conditions.
• How do I ensure that the outputs are not corrupted during power-up or power-down?
  To ensure that the outputs are not corrupted during power-up or power-down, it is recommended to use an external pull-up or pull-down resistor on the output pins, and to use a power-on reset (POR) circuit to initialize the device.
• What is the recommended operating voltage range for the SN74HC374DBR?
  The recommended operating voltage range for the SN74HC374DBR is 2V to 6V, with a typical operating voltage of 5V.
• How do I handle bus contention when multiple devices are driving the same bus?
  To handle bus contention when multiple devices are driving the same bus, it is recommended to use a bus buffer or a bus switch to isolate the devices and prevent data corruption.
• What is the maximum current that the SN74HC374DBR can sink or source?
  The maximum current that the SN74HC374DBR can sink or source is 25 mA per output pin, with a total device current of 100 mA.