The maximum operating frequency of the SN74HC02PWR is typically 100 MHz, but it can vary depending on the specific application and operating conditions.
To ensure proper power supply, connect VCC to a stable 2-6V power source, and GND to a reliable ground connection. Also, decouple the power supply with a 0.1uF capacitor to reduce noise and ensure stable operation.
The input voltage threshold for the SN74HC02PWR is typically around 1.5V for a logic high and 0.5V for a logic low, but it's recommended to use a clear and stable input signal to ensure reliable operation.
Yes, the SN74HC02PWR can operate at 3.3V, but the output voltage will be limited to around 3.1V. Ensure that the input signals are compatible with the 3.3V logic level, and consider using a level shifter if necessary.
The SN74HC02PWR has a maximum junction temperature of 150°C. Ensure good airflow, use a heat sink if necessary, and avoid operating the device near its maximum power dissipation to prevent overheating.
SN74HC02PWR datasheet
by Texas Instruments
Findchips
