The maximum clock frequency of the SN74FB1653PCA is 100 MHz, but it can vary depending on the operating conditions and the quality of the clock signal.
To ensure proper power and decoupling, use a high-quality power supply with low noise and ripple, and decouple the VCC pin with a 0.1 μF ceramic capacitor to ground. Additionally, use a 10 μF electrolytic capacitor in parallel to filter out any low-frequency noise.
The recommended termination scheme for the SN74FB1653PCA is to use a series terminator (Rs) of 33 Ω to 50 Ω at the far end of the transmission line, and a parallel terminator (Rt) of 50 Ω to 100 Ω at the near end of the transmission line.
To handle thermal management, ensure good airflow around the device, and use a heat sink if necessary. The maximum junction temperature (TJ) of the SN74FB1653PCA is 150°C, and the thermal resistance (θJA) is 30°C/W.
The SN74FB1653PCA has human-body model (HBM) ESD protection of up to 2 kV, and machine model (MM) ESD protection of up to 200 V.
SN74FB1653PCA datasheet
by Texas Instruments
