SN74F574N datasheet by Texas Instruments

SN74F574N Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that the SN74F574N can handle?
  The SN74F574N can handle clock frequencies up to 100 MHz.
• How do I ensure that the SN74F574N is properly powered?
  The SN74F574N requires a single 5V power supply, and it's recommended to use a decoupling capacitor of 0.1uF to 1uF between VCC and GND to ensure proper power supply decoupling.
• What is the maximum current that the SN74F574N can sink or source?
  The SN74F574N can sink or source up to 24mA of current per output pin.
• How do I handle the asynchronous reset input (CLR) on the SN74F574N?
  The CLR input is an asynchronous active-low reset input. It should be tied to VCC through a pull-up resistor if not used, and should be driven low to reset the device.
• What is the propagation delay of the SN74F574N?
  The propagation delay of the SN74F574N is typically around 10ns, but can vary depending on the operating conditions and load capacitance.