SN74F574DWR datasheet by Texas Instruments

SN74F574DWR Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that the SN74F574DWR can handle?
  The SN74F574DWR can handle clock frequencies up to 100 MHz.
• How do I ensure that the SN74F574DWR is properly powered?
  The SN74F574DWR requires a single 5V power supply, and it's recommended to use a decoupling capacitor of 0.1uF to 1uF between VCC and GND to ensure proper power supply decoupling.
• What is the maximum current that the SN74F574DWR can sink or source?
  The SN74F574DWR can sink or source up to 24mA of current per output pin.
• How do I handle the asynchronous reset input (CLR) on the SN74F574DWR?
  The CLR input should be tied to VCC through a pull-up resistor (e.g. 1kΩ) to ensure that the device is not inadvertently reset. A capacitor (e.g. 100nF) can also be added in parallel to filter out noise.
• What is the propagation delay of the SN74F574DWR?
  The propagation delay of the SN74F574DWR is typically around 10ns, but can vary depending on the operating conditions and load capacitance.