The SN74F521DW can handle clock frequencies up to 100 MHz.
The SN74F521DW requires a single 5V power supply, and it's recommended to use a decoupling capacitor of 0.1 μF to 1 μF between VCC and GND to ensure proper power supply decoupling.
The SN74F521DW can sink or source up to 64 mA of current per output pin.
The SN74F521DW has a maximum junction temperature of 150°C. Ensure good airflow, use a heat sink if necessary, and avoid overheating the device to prevent thermal shutdown.
Use a low-inductance layout, keep signal traces short, and avoid crossing signal lines over each other. Use a ground plane to reduce noise and ensure good signal integrity.