SN74CBTLV3861DGVR datasheet by Texas Instruments

SN74CBTLV3861DGVR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74CBTLV3861DGVR?
  The recommended operating voltage range for the SN74CBTLV3861DGVR is 2.3V to 3.6V.
• How do I ensure signal integrity when using the SN74CBTLV3861DGVR in high-speed applications?
  To ensure signal integrity, use controlled impedance PCB traces, terminate transmission lines properly, and consider using series termination resistors to reduce signal reflections.
• Can I use the SN74CBTLV3861DGVR in a 5V system?
  No, the SN74CBTLV3861DGVR is not recommended for use in 5V systems. It is designed to operate at a maximum voltage of 3.6V, and exceeding this voltage may cause damage to the device.
• How do I handle power sequencing when using the SN74CBTLV3861DGVR in a system with multiple power rails?
  Ensure that the VCC pin is powered up before the input signals, and that the input signals are stable before the VCC pin is powered down. This helps prevent latch-up and damage to the device.
• What is the maximum current that the SN74CBTLV3861DGVR can sink or source?
  The maximum current that the SN74CBTLV3861DGVR can sink or source is 24mA per pin, with a total device current limit of 100mA.