SN74AVC6T622RGYR datasheet by Texas Instruments

SN74AVC6T622RGYR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74AVC6T622RGYR?
  The recommended operating voltage range for the SN74AVC6T622RGYR is 1.2V to 3.6V, with a typical voltage of 1.8V.
• How do I handle the power sequencing for the SN74AVC6T622RGYR?
  It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up conditions.
• What is the maximum operating frequency for the SN74AVC6T622RGYR?
  The maximum operating frequency for the SN74AVC6T622RGYR is 100 MHz, but it can vary depending on the specific application and operating conditions.
• How do I ensure signal integrity when using the SN74AVC6T622RGYR?
  To ensure signal integrity, it is recommended to use a low-impedance output driver, minimize the trace length and impedance, and use a termination resistor if necessary. Additionally, the device should be placed close to the load to minimize signal degradation.
• What is the thermal derating for the SN74AVC6T622RGYR?
  The thermal derating for the SN74AVC6T622RGYR is 12.5 mW/°C above 25°C, which means that the device's power dissipation should be reduced as the temperature increases to prevent overheating.