SN74AVC16834DGGR datasheet by Texas Instruments

SN74AVC16834DGGR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74AVC16834DGGR?
  The recommended operating voltage range for the SN74AVC16834DGGR is 1.2V to 3.6V, with a typical operating voltage of 1.8V.
• How do I ensure signal integrity when using the SN74AVC16834DGGR in a high-speed application?
  To ensure signal integrity, use a low-impedance PCB design, keep signal traces short and away from noise sources, and use termination resistors as needed. Additionally, consider using a signal integrity analysis tool to simulate and optimize your design.
• Can I use the SN74AVC16834DGGR in a 5V system?
  No, the SN74AVC16834DGGR is not recommended for use in 5V systems. The maximum recommended operating voltage is 3.6V, and exceeding this voltage may damage the device or affect its performance.
• How do I handle power sequencing when using the SN74AVC16834DGGR in a system with multiple power domains?
  To ensure proper operation, power up the VCCIO pins before the VCC pins, and power down the VCC pins before the VCCIO pins. Additionally, ensure that the power supply voltage ramps up and down slowly to prevent damage to the device.
• What is the maximum clock frequency supported by the SN74AVC16834DGGR?
  The maximum clock frequency supported by the SN74AVC16834DGGR is 250 MHz, but this may vary depending on the specific application and operating conditions.