SN74AUC16374DGVR datasheet by Texas Instruments

SN74AUC16374DGVR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74AUC16374DGVR?
  The recommended operating voltage range for the SN74AUC16374DGVR is 1.4V to 3.6V, with a typical operating voltage of 1.8V.
• How do I handle the power sequencing for the SN74AUC16374DGVR?
  It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
• What is the maximum clock frequency supported by the SN74AUC16374DGVR?
  The maximum clock frequency supported by the SN74AUC16374DGVR is 100 MHz, but it can vary depending on the operating voltage, temperature, and load conditions.
• How do I ensure signal integrity and minimize noise on the output signals?
  To ensure signal integrity and minimize noise on the output signals, it is recommended to use a low-impedance output driver, such as a 50-ohm resistor in series with the output pin, and to use a bypass capacitor (e.g., 0.1uF) between the VCC pin and GND pin.
• What is the maximum current that can be sourced or sunk by the output pins?
  The maximum current that can be sourced or sunk by the output pins of the SN74AUC16374DGVR is ±24 mA, but it is recommended to limit the output current to ±12 mA to ensure reliable operation and minimize power consumption.