Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img SN74AS00D datasheet by Texas Instruments

    • Quadruple 2-Input Positive-NAND Gates 14-SOIC 0 to 70
    • Original
    • No
    • Unknown
    • Obsolete
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips

    SN74AS00D datasheet preview

    SN74AS00D Frequently Asked Questions (FAQs)

    • The maximum operating frequency of the SN74AS00D is typically around 100 MHz, but it can vary depending on the specific application and operating conditions.
    • It is recommended to power up the VCC pin before applying any input signals to the device. Also, ensure that the input signals are within the specified voltage range to prevent damage to the device.
    • The recommended termination scheme for the SN74AS00D is to use a pull-up resistor to VCC for each output, with a value between 1 kΩ to 10 kΩ, depending on the specific application and load requirements.
    • Yes, the SN74AS00D can be used in a 3.3V system, but the input voltage thresholds and output voltage levels may not be compatible with 3.3V logic levels. It is recommended to use a level translator or voltage regulator to ensure compatibility.
    • It is recommended to handle the SN74AS00D with ESD-protective equipment and follow proper ESD handling procedures to prevent damage to the device.
    Supplyframe Tracking Pixel