SN74ALVTH16601GR datasheet by Texas Instruments

SN74ALVTH16601GR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74ALVTH16601GR?
  The recommended operating voltage range for the SN74ALVTH16601GR is 2.3V to 3.6V, with a typical voltage of 3.3V.
• How do I ensure signal integrity when using the SN74ALVTH16601GR?
  To ensure signal integrity, use a low-impedance PCB design, keep signal traces short, and use termination resistors as needed. Also, follow the recommended layout guidelines in the datasheet.
• Can I use the SN74ALVTH16601GR in a 5V system?
  No, the SN74ALVTH16601GR is not recommended for use in 5V systems. It is designed for 3.3V or lower voltage systems. Using it in a 5V system may result in reduced performance, increased power consumption, or even damage to the device.
• How do I handle power sequencing when using the SN74ALVTH16601GR?
  Power sequencing is critical when using the SN74ALVTH16601GR. Ensure that the VCC pin is powered up before the input signals, and that the input signals are stable before the clock signal is applied.
• What is the maximum clock frequency supported by the SN74ALVTH16601GR?
  The maximum clock frequency supported by the SN74ALVTH16601GR is 100 MHz, but this can vary depending on the specific application and operating conditions.