SN74ALVTH16601DL datasheet by Texas Instruments

SN74ALVTH16601DL Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74ALVTH16601DL?
  The recommended operating voltage range for the SN74ALVTH16601DL is 1.65 V to 3.6 V, with a typical operating voltage of 1.8 V or 2.5 V.
• How do I ensure signal integrity when using the SN74ALVTH16601DL?
  To ensure signal integrity, use a low-impedance PCB design, keep signal traces short, and use termination resistors (e.g., 22-ohm to 33-ohm) at the receiving end. Additionally, consider using a signal integrity analysis tool to simulate and optimize your design.
• What is the maximum frequency of operation for the SN74ALVTH16601DL?
  The maximum frequency of operation for the SN74ALVTH16601DL is 250 MHz, but this can vary depending on the specific application, PCB design, and operating conditions.
• Can I use the SN74ALVTH16601DL in a 5-V system?
  While the SN74ALVTH16601DL is not designed for 5-V operation, it can tolerate 5-V input signals with some limitations. However, it's essential to ensure that the output voltage does not exceed the recommended maximum rating of 3.6 V to prevent damage to the device.
• How do I handle power sequencing when using the SN74ALVTH16601DL?
  To prevent damage or incorrect operation, ensure that the power supply voltage (VCC) is applied before the input signals. Also, ensure that the power-down sequence is in the reverse order, with input signals removed before VCC is turned off.