SN74ALS1035N datasheet by Texas Instruments

SN74ALS1035N Frequently Asked Questions (FAQs)

• What is the maximum operating frequency of the SN74ALS1035N?
  The maximum operating frequency of the SN74ALS1035N is 100 MHz, but it can vary depending on the specific application and operating conditions.
• How do I handle the output enable (OE) pin in my design?
  The output enable (OE) pin should be connected to a logic low (GND) to enable the outputs, and to a logic high (VCC) to disable the outputs. Leaving the OE pin floating can cause unpredictable behavior.
• What is the recommended power-on sequence for the SN74ALS1035N?
  The recommended power-on sequence is to apply power to the VCC pin first, followed by the input signals. This helps to prevent unwanted output states during power-up.
• Can I use the SN74ALS1035N in a 3.3V system?
  Yes, the SN74ALS1035N can be used in a 3.3V system, but the input voltage levels should be adjusted accordingly. The device is specified to operate with input voltage levels of 0.8V to 2.4V for a 3.3V supply.
• How do I handle the thermal considerations for the SN74ALS1035N?
  The SN74ALS1035N has a maximum junction temperature of 150°C. To ensure reliable operation, the device should be operated within the recommended temperature range, and adequate heat sinking should be provided to prevent overheating.