SN74ACT10PWR datasheet by Texas Instruments

SN74ACT10PWR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74ACT10PWR?
  The recommended operating voltage range for the SN74ACT10PWR is 4.5V to 5.5V, although it can operate as low as 3.5V with reduced performance.
• How do I handle the power-up and power-down sequencing for the SN74ACT10PWR?
  It is recommended to power up the VCC pin before the input signals and power down the VCC pin after the input signals to prevent unwanted output states.
• What is the maximum frequency of operation for the SN74ACT10PWR?
  The maximum frequency of operation for the SN74ACT10PWR is typically around 100 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure that the SN74ACT10PWR is properly terminated to prevent signal reflections?
  It is recommended to use a termination resistor (e.g. 50 ohms) at the output of the SN74ACT10PWR to prevent signal reflections and ensure signal integrity.
• Can I use the SN74ACT10PWR in a 3.3V system?
  Yes, the SN74ACT10PWR can be used in a 3.3V system, but the output voltage will be limited to around 3.3V and the device may not meet the specified timing parameters.