SN74ACT10PW datasheet by Texas Instruments

SN74ACT10PW Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74ACT10PW?
  The recommended operating voltage range for the SN74ACT10PW is 4.5V to 5.5V, although it can operate as low as 3.5V with reduced performance.
• How do I ensure that the SN74ACT10PW is properly powered and bypassed?
  To ensure proper power and bypassing, use a 0.1uF ceramic capacitor between VCC and GND, and a 10uF electrolytic capacitor between VCC and GND, both as close to the device as possible.
• What is the maximum frequency of operation for the SN74ACT10PW?
  The maximum frequency of operation for the SN74ACT10PW is 100 MHz, although this can vary depending on the specific application and operating conditions.
• How do I handle thermal considerations for the SN74ACT10PW?
  To handle thermal considerations, ensure good airflow around the device, use a heat sink if necessary, and avoid operating the device at maximum power dissipation for extended periods.
• Is the SN74ACT10PW compatible with 3.3V logic?
  Yes, the SN74ACT10PW is compatible with 3.3V logic, although the output voltage may not be fully compatible with 3.3V systems. Use a voltage translator or level shifter if necessary.