SN74AC11DBR datasheet by Texas Instruments

SN74AC11DBR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74AC11DBR?
  The recommended operating voltage range for the SN74AC11DBR is 2.0 V to 6.0 V, with a typical operating voltage of 5.0 V.
• How do I handle the input pins when they are not in use?
  When the input pins are not in use, they should be tied to a valid logic level (either VCC or GND) to prevent them from floating and causing unintended behavior.
• What is the maximum frequency of operation for the SN74AC11DBR?
  The maximum frequency of operation for the SN74AC11DBR is typically around 100 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure that the SN74AC11DBR is properly powered?
  To ensure proper power supply, the VCC pin should be connected to a stable power source, and the GND pin should be connected to a solid ground plane. Decoupling capacitors should also be used to filter out noise and ensure stable operation.
• Can I use the SN74AC11DBR in a 3.3V system?
  Yes, the SN74AC11DBR can be used in a 3.3V system, but the input and output voltage levels should be adjusted accordingly to ensure proper operation.