The maximum cable length supported by the SN65MLVD200D is dependent on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths of up to 100 meters at a data rate of 100 Mbps.
To ensure signal integrity with the SN65MLVD200D, it is recommended to follow proper PCB layout and design guidelines, such as using differential pairs, minimizing trace lengths, and using signal shielding. Additionally, the use of terminators and common-mode chokes can help to reduce electromagnetic interference (EMI) and improve signal quality.
The power consumption of the SN65MLVD200D varies depending on the operating mode and data rate. However, according to the datasheet, the typical power consumption is around 150 mW at a data rate of 100 Mbps.
Yes, the SN65MLVD200D is rated for operation over an industrial temperature range of -40°C to 85°C, making it suitable for use in a variety of industrial applications.
The SN65MLVD200D can be configured for half-duplex or full-duplex operation by setting the appropriate pins and registers. For half-duplex operation, the TXEN pin should be tied low, while for full-duplex operation, the TXEN pin should be tied high. Additionally, the device's registers should be programmed accordingly to enable or disable the transmitter and receiver.
SN65MLVD200D datasheet
by Texas Instruments
Findchips
