The maximum cable length supported by the SN65LVDS86AQDGGR is approximately 10 meters (33 feet) at a data rate of 655 Mbps. However, this length can vary depending on the specific application, cable quality, and noise environment.
To ensure signal integrity with the SN65LVDS86AQDGGR, it is recommended to use a differential pair for the LVDS signals, keep the signal traces short and well-matched, and use a common-mode choke or ferrite bead to filter out electromagnetic interference (EMI).
The power consumption of the SN65LVDS86AQDGGR depends on the operating frequency and output load. At a typical operating frequency of 65 MHz, the device consumes around 150 mW of power. However, this value can vary depending on the specific application and operating conditions.
Yes, the SN65LVDS86AQDGGR is designed for high-speed data transmission and can support data rates up to 1.92 Gbps. It is suitable for applications that require high-speed data transmission, such as high-definition video transmission and high-speed data acquisition.
To troubleshoot issues with the SN65LVDS86AQDGGR, it is recommended to check the power supply voltage, signal integrity, and output load. Use an oscilloscope to verify the signal waveform and amplitude, and check for any signs of signal degradation or distortion. Also, ensure that the device is properly terminated and that the input signals are within the specified voltage range.
SN65LVDS86AQDGGR datasheet
by Texas Instruments
Findchips
Findchips