SN65LVDS33DR datasheet by Texas Instruments

SN65LVDS33DR Frequently Asked Questions (FAQs)

• What is the maximum cable length supported by the SN65LVDS33DR?
  The maximum cable length supported by the SN65LVDS33DR is dependent on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths of up to 10 meters (33 feet) at a data rate of 1.5 Gbps.
• How do I terminate the differential lines in the SN65LVDS33DR?
  The SN65LVDS33DR requires a 100-ohm differential termination resistor at the receiver end to ensure proper signal integrity. The termination resistor should be placed as close to the receiver as possible.
• What is the power consumption of the SN65LVDS33DR?
  The power consumption of the SN65LVDS33DR is typically around 150 mW (3.3 V, 45 mA) when operating at a data rate of 1.5 Gbps. However, this can vary depending on the specific application and operating conditions.
• Can the SN65LVDS33DR be used in a multi-point configuration?
  No, the SN65LVDS33DR is designed for point-to-point connections only. It is not suitable for multi-point configurations.
• What is the maximum data rate supported by the SN65LVDS33DR?
  The SN65LVDS33DR supports data rates of up to 1.5 Gbps.