The maximum cable length supported by the SN65LVDS048ADR is approximately 10 meters (33 feet) at a data rate of 655 Mbps. However, this length can vary depending on the specific application, cable quality, and noise environment.
To ensure signal integrity with the SN65LVDS048ADR, it is recommended to use a differential pair for each signal, keep the traces as short as possible, and use a common mode choke or ferrite bead to reduce electromagnetic interference (EMI). Additionally, use a signal ground plane and follow proper PCB layout practices.
The power consumption of the SN65LVDS048ADR depends on the operating frequency and output load. At a typical operating frequency of 100 MHz, the device consumes around 150 mW of power. However, this value can vary depending on the specific application and operating conditions.
Yes, the SN65LVDS048ADR is designed for high-speed data transmission over long distances. It supports data rates up to 1.92 Gbps and is suitable for applications such as flat-panel displays, set-top boxes, and digital video recorders.
To troubleshoot issues with the SN65LVDS048ADR, start by checking the power supply voltage, clock frequency, and signal integrity. Use an oscilloscope to verify the signal waveform and check for any signs of signal degradation or noise. Also, ensure that the device is properly terminated and that the PCB layout is correct.
SN65LVDS048ADR datasheet
by Texas Instruments
