The maximum cable length supported by the SN65LVDM051D is approximately 10 meters (33 feet) at a data rate of 1.5 Gbps, but this can vary depending on the specific application and cable quality.
To ensure signal integrity with the SN65LVDM051D, it is recommended to use a high-quality cable with a characteristic impedance of 100 ohms, and to follow proper PCB layout and routing guidelines to minimize signal reflections and crosstalk.
Yes, the SN65LVDM051D can be used in a multi-point configuration, but it is limited to a maximum of 32 devices on a single bus. Additionally, the device must be configured as a slave device in a multi-point configuration.
The power consumption of the SN65LVDM051D varies depending on the operating mode and data rate. In typical operation, the device consumes around 150 mW of power, but this can increase to up to 300 mW at higher data rates.
Yes, the SN65LVDM051D is compatible with other LVDS transceivers that comply with the TIA/EIA-644 LVDS standard. However, it is recommended to verify compatibility with specific devices and systems before implementation.
SN65LVDM051D datasheet
by Texas Instruments
