The maximum cable length supported by the SN65C3232DWR depends on the baud rate and the type of cable used. As a general rule, the maximum cable length is around 100 meters at 9600 bps and 10 meters at 115200 bps. However, it's recommended to consult the RS-232 standard and perform signal integrity analysis to determine the maximum cable length for a specific application.
The SN65C3232DWR does not support 9-bit data transmission. It is designed for 5- to 8-bit data transmission. If 9-bit data transmission is required, a different device or a custom solution would be needed.
No, the SN65C3232DWR is a RS-232 transceiver and is not designed for RS-485 communication. For RS-485 communication, a different device such as the THVD1550 or the SN65HVD72 would be needed.
The power consumption of the SN65C3232DWR in shutdown mode is typically around 1 μA. However, this value can vary depending on the specific application and the voltage supply. It's recommended to consult the datasheet and perform power consumption analysis to determine the exact power consumption in shutdown mode.
Yes, the SN65C3232DWR can be used in a 3.3V system. The device is designed to operate from a 3.0V to 5.5V power supply, making it compatible with 3.3V systems. However, it's recommended to consult the datasheet and perform signal integrity analysis to ensure that the device operates correctly in the specific application.
SN65C3232DWR datasheet
by Texas Instruments
Findchips
