The maximum cable length supported by the SN65C23243DL is dependent on the baud rate and the type of cable used. As a general guideline, the maximum cable length for a baud rate of 115.2 kbps is around 100 meters, while for a baud rate of 1 Mbps, it is around 30 meters.
The SN65C23243DL can be configured for half-duplex or full-duplex operation by setting the corresponding pins (RTS and CTS) high or low. For half-duplex operation, RTS and CTS should be tied together, while for full-duplex operation, RTS should be connected to the transmitter and CTS should be connected to the receiver.
The power consumption of the SN65C23243DL depends on the operating mode and the supply voltage. In normal operation, the device consumes around 10-15 mA, while in shutdown mode, it consumes around 1-2 mA.
To ensure reliable data transmission over long distances using the SN65C23243DL, it is recommended to use a high-quality cable with proper shielding, termination, and impedance matching. Additionally, the device should be operated within its specified temperature range, and the power supply should be stable and noise-free.
Yes, the SN65C23243DL can be used in industrial automation applications due to its high reliability, wide operating temperature range, and ability to operate in harsh environments. It is commonly used in industrial control systems, robotics, and process control applications.
SN65C23243DL datasheet
by Texas Instruments
