SN54LS367AJ datasheet by Texas Instruments

SN54LS367AJ Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that the SN54LS367AJ can handle?
  The maximum clock frequency of the SN54LS367AJ is 30 MHz.
• How do I ensure that the SN54LS367AJ is properly powered?
  The SN54LS367AJ requires a single 5V power supply, and it's recommended to use a decoupling capacitor of 0.1uF to 1uF between VCC and GND to reduce noise and ensure stable operation.
• What is the propagation delay of the SN54LS367AJ?
  The propagation delay of the SN54LS367AJ is typically around 10-15 ns, but it can vary depending on the operating conditions and load capacitance.
• Can I use the SN54LS367AJ in a 3.3V system?
  No, the SN54LS367AJ is designed to operate at 5V, and using it in a 3.3V system may not guarantee proper operation or may even damage the device.
• How do I handle the output enable (OE) pin?
  The output enable (OE) pin is active-low, meaning that the outputs are enabled when OE is low (GND) and disabled when OE is high (VCC).