Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img SJA1000 datasheet by NXP Semiconductors

    • Anomaly of the SJA1000 Stand-alone CAN Controller
    • Original
    • Yes
    • Unknown
    • Obsolete
    • 8542.31.00.01
    • 8542.31.00.00
    • Powered by Findchips Logo Findchips

    SJA1000 datasheet preview

    SJA1000 Frequently Asked Questions (FAQs)

    • The SJA1000 can support up to 32 nodes in a CAN bus network, but this number can be limited by the physical layer and the specific application requirements.
    • The SJA1000 has built-in error detection and fault confinement mechanisms, including bit error detection, stuff error detection, and CRC error detection. It also has a bus fault detection mechanism that can detect and report bus faults, such as bus shorts or opens.
    • Yes, the SJA1000 can operate in a multi-master configuration, where multiple nodes can transmit data on the CAN bus simultaneously. However, this requires careful design and implementation to avoid bus conflicts and ensure reliable data transmission.
    • The SJA1000 supports data transfer rates up to 1 Mbps, which is the maximum specified by the CAN 2.0B protocol.
    • The SJA1000 has a built-in power-on reset (POR) circuit that resets the device when power is applied. It also has a power-down mode that can be controlled by the host microcontroller to reduce power consumption when the device is not in use.
    Supplyframe Tracking Pixel