The recommended PCB footprint for the SI2301CDS-T1-GE3 is a standard SOT23-6 package with a 1.8mm x 1.35mm body size. A minimum pad size of 0.5mm x 0.5mm is recommended for reliable soldering.
To ensure proper biasing, connect the VCC pin to a stable 2.5V to 5.5V power supply, and the GND pin to a solid ground plane. Additionally, decouple the VCC pin with a 10nF to 100nF capacitor to reduce noise and ensure stable operation.
The maximum allowable power dissipation for the SI2301CDS-T1-GE3 is 250mW. Ensure that the device is properly heat-sinked and operated within the recommended temperature range to prevent overheating.
To protect the SI2301CDS-T1-GE3 from ESD, handle the device with an anti-static wrist strap or mat, and ensure that the PCB is designed with ESD protection in mind, such as using ESD-protection diodes or resistors.
The recommended operating temperature range for the SI2301CDS-T1-GE3 is -40°C to 125°C. Operating the device outside this range may affect its performance and reliability.
SI2301CDS-T1-GE3 datasheet
by Vishay Siliconix
