A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital sections separate, and use a common ground point for the analog and digital grounds.
Use a reliable communication protocol like SPI or I2C, and ensure proper signal termination and shielding. Also, use a common clock source and ensure the microcontroller's clock frequency is within the SD57060-01's specified range.
The SD57060-01 can operate from -40°C to 125°C, but the recommended operating temperature range is -20°C to 85°C for optimal performance and reliability.
Use an external power-on reset circuit or a dedicated reset IC to ensure a clean power-on reset. For brown-out detection, use an external voltage supervisor or a dedicated brown-out detection IC.
Use 100nF to 1uF ceramic capacitors for decoupling, placed as close as possible to the SD57060-01's power pins. Additional bulk capacitors (e.g., 10uF) can be used for further noise reduction.
