SC26C92C1B datasheet by Philips Semiconductors

SC26C92C1B Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SC26C92C1B?
  The recommended operating voltage range for the SC26C92C1B is 4.5V to 5.5V, with a typical voltage of 5V.
• How do I handle the thermal management of the SC26C92C1B?
  The SC26C92C1B has a thermal pad on the bottom of the package, which should be connected to a copper plane on the PCB to dissipate heat. Ensure good thermal conductivity and avoid thermal vias under the device.
• What is the maximum data transfer rate of the SC26C92C1B?
  The SC26C92C1B has a maximum data transfer rate of 1 Mbps in asynchronous mode and 3 Mbps in synchronous mode.
• How do I configure the SC26C92C1B for 9-bit or 8-bit data transmission?
  The SC26C92C1B can be configured for 9-bit or 8-bit data transmission by setting the M1 and M0 pins. For 9-bit mode, set M1=1 and M0=1, and for 8-bit mode, set M1=0 and M0=0.
• What is the purpose of the XTAL1 and XTAL2 pins on the SC26C92C1B?
  The XTAL1 and XTAL2 pins are used to connect an external crystal oscillator, which provides the clock signal for the device. The crystal oscillator is required for the device to function properly.