SC16IS762IBS,151 datasheet by NXP Semiconductors

SC16IS762IBS,151 Frequently Asked Questions (FAQs)

• What is the maximum baud rate supported by SC16IS762IBS,151?
  The SC16IS762IBS,151 supports baud rates up to 5 Mbps.
• Can I use SC16IS762IBS,151 as a UART-to-UART bridge?
  Yes, the SC16IS762IBS,151 can be used as a UART-to-UART bridge, allowing two UART devices to communicate with each other.
• How do I configure the SC16IS762IBS,151 for 9-bit data transmission?
  To configure the SC16IS762IBS,151 for 9-bit data transmission, set the M1 and M0 bits in the LCR register to '11' and '10', respectively. Additionally, set the WLS[1:0] bits in the LCR register to '11' to select 9-bit data length.
• What is the purpose of the RTS and CTS signals in SC16IS762IBS,151?
  The RTS (Request to Send) and CTS (Clear to Send) signals are used for flow control in the SC16IS762IBS,151. RTS is an output signal that indicates when the device is ready to receive data, while CTS is an input signal that indicates when the device is allowed to transmit data.
• Can I use SC16IS762IBS,151 in a multi-drop configuration?
  Yes, the SC16IS762IBS,151 can be used in a multi-drop configuration, where multiple devices are connected to a single bus. However, this requires careful consideration of the bus topology and signal loading to ensure reliable operation.