The recommended operating temperature range for SAB80C537-N is -40°C to 125°C, as specified in the datasheet. However, it's essential to note that the device can tolerate a wider temperature range during storage, which is -55°C to 150°C.
To ensure reliable communication with the SAB80C537-N over the CAN bus, it's crucial to follow the CAN bus specification (ISO 11898) and implement proper bus termination, cable shielding, and node configuration. Additionally, ensure that the CAN bus voltage levels and signal timing meet the specified requirements.
The maximum allowed voltage on the VCC pin of the SAB80C537-N is 5.5V. Exceeding this voltage can cause permanent damage to the device. It's essential to ensure that the power supply voltage is within the recommended range of 4.5V to 5.5V.
The watchdog timer (WDT) in the SAB80C537-N is used to detect and recover from system failures. To handle the WDT, you need to periodically reset it using the WDTRST instruction or by writing to the WDT control register. Failure to do so will result in a system reset.
The reset pin (RST) on the SAB80C537-N is an active-low input that, when asserted, resets the microcontroller. The RST pin can be used to initiate a system reset, which can be useful for fault recovery or during the power-up sequence.