Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img S5980 datasheet by Hamamatsu Photonics

    • Si PIN photodiode
    • Original
    • Yes
    • Unknown
    • Active
    • 8541.40.60.50
    • 8541.40.60.50
    • Powered by Findchips Logo Findchips

    S5980 datasheet preview

    S5980 Frequently Asked Questions (FAQs)

    • The recommended operating temperature range for the S5980 is -20°C to 70°C. However, it can operate up to 85°C with reduced performance.
    • The S5980 is a sensitive device and requires careful handling to prevent damage. It is recommended to handle the device by the ceramic package, avoid touching the optical surface, and use an anti-static wrist strap or mat to prevent electrostatic discharge.
    • The recommended soldering temperature for the S5980 is 260°C (500°F) or less, and the soldering time should be within 10 seconds. It is also recommended to use a soldering iron with a temperature control and a fluxless soldering process.
    • The S5980 is not hermetically sealed, so it is not recommended for use in high-humidity environments. However, it can be used in environments with moderate humidity levels (up to 60% RH) if proper precautions are taken, such as using a conformal coating or potting the device.
    • The optical surface of the S5980 should be cleaned using a soft, dry brush or a lint-free wipe with a mild detergent. Avoid using harsh chemicals, abrasive materials, or ultrasonic cleaning, as they can damage the device.
    Supplyframe Tracking Pixel