The maximum operating temperature range for the S29GL512S11FHIV13 is -40°C to +85°C.
The HOLD# signal should be asserted low to pause the current operation and de-asserted high to resume the operation. During hold, the device will tri-state its outputs and ignore any input signals.
The WP# signal is used to prevent accidental writes to the status register and the block protection bits. When WP# is low, the device allows writes to the status register and block protection bits, and when WP# is high, writes are inhibited.
The device density and organization can be determined by reading the device ID and revision ID through the ID read command (90h). The S29GL512S11FHIV13 has a density of 512 Mbits and is organized as 64 M x 8 bits or 32 M x 16 bits.
The recommended power-up sequence is to apply VCC first, followed by VCCQ, and then the clock signal. The device should be in a standby or reset state during power-up.
