The maximum operating temperature range for the S29GL256S10DHV023 is -40°C to +85°C.
The HOLD# signal should be asserted low to pause the current operation and enter a low-power state. De-asserting HOLD# resumes the operation.
The WP# pin is used to prevent accidental writes to the device. When WP# is low, the device is write-protected, and when it's high, the device is writable.
The device density and configuration can be determined by reading the Device ID and Configuration Register (CIDR) at address 0x00000000.
The recommended power-up sequence is to apply VCC first, followed by VPP, and then the clock signal. This ensures proper device initialization.
