The S29GL256S10DHV020 has an industrial temperature range of -40°C to +85°C, and an extended temperature range of -40°C to +105°C.
The HOLD# signal should be asserted low to pause the current read or write operation, and de-asserted high to resume the operation. Note that HOLD# should not be asserted during a write operation that is in progress.
The recommended power-up sequence is to apply VCC first, followed by VPP (if used), and then the clock signal. The device should be in a reset state (RESET# low) during power-up.
The device density and configuration can be determined by reading the device ID and configuration registers. The device ID can be read using the JEDEC ID command (0x9F), and the configuration registers can be read using the Read Configuration Register command (0x35).
The WP# signal is used to protect the device from accidental writes. When WP# is asserted low, the device is write-protected, and when it is de-asserted high, the device is write-enabled.
