S29GL256S10DHV020 datasheet by Cypress Semiconductor

S29GL256S10DHV020 Frequently Asked Questions (FAQs)

• What is the maximum operating temperature range for this device?
  The S29GL256S10DHV020 has an industrial temperature range of -40°C to +85°C, and an extended temperature range of -40°C to +105°C.
• How do I handle the hold signal (HOLD#) during read and write operations?
  The HOLD# signal should be asserted low to pause the current read or write operation, and de-asserted high to resume the operation. Note that HOLD# should not be asserted during a write operation that is in progress.
• What is the recommended power-up sequence for this device?
  The recommended power-up sequence is to apply VCC first, followed by VPP (if used), and then the clock signal. The device should be in a reset state (RESET# low) during power-up.
• How do I determine the device density and configuration?
  The device density and configuration can be determined by reading the device ID and configuration registers. The device ID can be read using the JEDEC ID command (0x9F), and the configuration registers can be read using the Read Configuration Register command (0x35).
• What is the purpose of the Write Protection (WP#) signal?
  The WP# signal is used to protect the device from accidental writes. When WP# is asserted low, the device is write-protected, and when it is de-asserted high, the device is write-enabled.