S29GL128P10FFI022 datasheet by Cypress Semiconductor

S29GL128P10FFI022 Frequently Asked Questions (FAQs)

• What is the maximum number of erase cycles for this device?
  The S29GL128P10FFI022 has a minimum of 100,000 erase cycles per sector, and a minimum of 10,000 erase cycles per block.
• How do I handle the transition from the active to the standby power mode?
  To transition from active to standby power mode, the CE# pin should be driven high, and the OE# and WE# pins should be driven high or left floating. The device will then enter standby power mode, reducing power consumption.
• What is the recommended method for detecting the end of a program or erase operation?
  The recommended method is to use the RY/BY# pin, which is a hardware output that indicates the status of the device. When the RY/BY# pin is low, the device is busy, and when it is high, the operation is complete.
• How do I handle the case where the device is powered up with a voltage that is outside the recommended operating range?
  The device has a built-in power-on reset (POR) circuit that will reset the device when the power supply voltage is outside the recommended operating range. The device will not operate correctly until the power supply voltage is within the recommended range.
• What is the maximum data retention period for this device?
  The S29GL128P10FFI022 has a minimum data retention period of 20 years at a temperature of 25°C, and 10 years at a temperature of 55°C.