S29GL032N90TFI010 datasheet by Spansion

S29GL032N90TFI010 Frequently Asked Questions (FAQs)

• What is the maximum operating temperature range for this device?
  The maximum operating temperature range for the S29GL032N90TFI010 is -40°C to +85°C.
• How do I handle the hold signal (HOLD#) during read and write operations?
  The HOLD# signal should be asserted low to pause the current operation and de-asserted high to resume the operation. During hold, the device will tri-state its outputs and ignore any input signals.
• What is the purpose of the write protection (WP#) pin?
  The WP# pin is used to prevent accidental writes to the status register and the block protection bits. When WP# is low, the status register and block protection bits are write-protected.
• How do I determine the device density and organization?
  The device density and organization can be determined by reading the device ID and revision ID through the ID read command (90h). The S29GL032N90TFI010 has a density of 32 Mbits and is organized as 2048 blocks of 16 Kbytes each.
• What is the recommended power-up sequence for this device?
  The recommended power-up sequence is to apply VCC first, followed by VCCQ, and then the clock signal. The device should be in a standby or reset state during power-up.