The maximum operating temperature range for the S29GL01GS11DHIV13 is -40°C to +85°C.
The hold signal (HOLD#) should be asserted low during a write operation to prevent any other operation from interrupting the write cycle.
The write protect (WP#) pin is used to prevent accidental writes to the device. When WP# is low, the device is in a protected state and writes are inhibited.
The device density and organization can be determined by reading the device ID and using the information in the datasheet to decode the density and organization.
The recommended power-up sequence is to apply VCC first, followed by VPP (if used), and then the clock signal.
