S29GL01GP12FFI010 datasheet by Spansion

S29GL01GP12FFI010 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for this flash memory?
  The recommended operating voltage range for the S29GL01GP12FFI010 is 2.7V to 3.6V.
• How do I handle the hold signal (HOLD#) during read and write operations?
  The hold signal (HOLD#) should be asserted low to pause the current operation and de-asserted high to resume the operation.
• What is the purpose of the write protect (WP#) signal?
  The write protect (WP#) signal is used to prevent accidental writes to the device. When WP# is low, the device is in write-protect mode, and when WP# is high, the device is in write-enable mode.
• How do I perform a sector erase operation?
  To perform a sector erase operation, send the sector erase command (0x30) followed by the address of the sector to be erased. The device will then erase the entire sector.
• What is the maximum number of erase cycles for this device?
  The S29GL01GP12FFI010 has a maximum of 100,000 erase cycles per sector.