S29GL01GP11TFIR20 datasheet by Spansion

S29GL01GP11TFIR20 Frequently Asked Questions (FAQs)

• What is the maximum operating temperature range for this device?
  The maximum operating temperature range for the S29GL01GP11TFIR20 is -40°C to +85°C.
• How do I handle the hold (HOLD#) and output enable (OE#) signals?
  The HOLD# signal should be used to pause the device during a read or write operation, while the OE# signal should be used to tri-state the output buffers during a read operation.
• What is the purpose of the write protect (WP#) signal?
  The WP# signal is used to prevent accidental writes to the device. When WP# is low, the device is in a protected state and writes are inhibited.
• How do I perform a sector erase operation?
  To perform a sector erase operation, send the erase command (0x20) followed by the sector address. The device will then erase the entire sector.
• What is the purpose of the reset (RESET#) signal?
  The RESET# signal is used to reset the device to its default state. When RESET# is low, the device is in a reset state and all internal state machines are reset.