The recommended land pattern for the S1210R-103J is a rectangular pad with a size of 1.27 mm x 1.27 mm, with a non-solder mask defined (NSMD) pad shape to ensure proper soldering and thermal relief.
During reflow soldering, it's recommended to use a peak temperature of 260°C (500°F) for a maximum of 10 seconds to prevent damage to the inductor. A nitrogen atmosphere is also recommended to reduce oxidation.
The maximum current rating for the S1210R-103J inductor is 10.2 A, based on a temperature rise of 40°C (72°F) above the ambient temperature. However, it's recommended to derate the current based on the specific application and operating conditions.
Yes, the S1210R-103J inductor is suitable for high-frequency applications up to 1 GHz, due to its low equivalent series resistance (ESR) and high self-resonant frequency (SRF). However, it's recommended to consult the datasheet and application notes for specific guidance on high-frequency design.
To ensure the S1210R-103J inductor meets your specific application's requirements, it's recommended to consult the datasheet, application notes, and simulation models provided by API Delevan. Additionally, it's recommended to perform thorough testing and validation of the inductor in your specific application.
Findchips
Findchips