Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    S1210-471K datasheet by API Delevan

    • RF Inductors - Shielded Surface Mount Inductor - Surface Mount - S1210
    • Original
    • No
    • No
    • Active
    • EAR99
    • 8504.50.80.00
    • 8504.50.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    S1210-471K datasheet preview

    S1210-471K Frequently Asked Questions (FAQs)

    • The recommended PCB land pattern for the S1210-471K is a rectangular pad with a size of 3.8mm x 2.5mm, with a 1.3mm diameter hole in the center for the pin. The pad should be solder-mask defined and have a non-solder-mask-defined area of 0.5mm around the pin.
    • The S1210-471K has a maximum operating temperature of 125°C. To ensure reliable operation, it's essential to provide adequate thermal relief by using a thermal pad or via under the inductor, and keeping the surrounding components at a safe distance to prevent thermal coupling.
    • The self-resonant frequency of the S1210-471K is approximately 150 MHz. This means that the inductor will start to behave like a capacitor above this frequency, and its inductive characteristics will be compromised.
    • The S1210-471K is designed to withstand moderate vibration levels. However, if your application involves extreme vibration, it's recommended to use a more robust inductor or add additional mechanical support to ensure the inductor's reliability.
    • To select the correct inductor, consider factors such as the operating frequency, current rating, inductance value, and physical size. You should also evaluate the inductor's characteristics, such as its Q factor, DC resistance, and core material, to ensure it meets your application's requirements.
    Supplyframe Tracking Pixel