Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img S1087-01 datasheet by Hamamatsu Photonics

    • Si photodiode
    • Original
    • Yes
    • Unknown
    • Active
    • 8541.40.80.00
    • 8541.40.80.00
    • Powered by Findchips Logo Findchips

    S1087-01 datasheet preview

    S1087-01 Frequently Asked Questions (FAQs)

    • The recommended operating temperature range for the S1087-01 is -20°C to 70°C. However, it's essential to note that the device's performance may degrade at extreme temperatures, and it's recommended to operate it within a narrower range (e.g., 0°C to 50°C) for optimal performance.
    • To ensure optimal reliability and lifespan, handle the S1087-01 with care to avoid mechanical stress, scratches, or contamination. Use an anti-static wrist strap or mat, and avoid touching the device's pins or sensitive areas. Store the device in a clean, dry environment, and avoid exposing it to direct sunlight or extreme temperatures.
    • The recommended soldering temperature for the S1087-01 is 260°C (500°F) or lower, with a soldering time of 3 seconds or less. It's essential to follow the recommended soldering profile to avoid damaging the device.
    • While the S1087-01 is designed to operate in a normal humidity environment, it's not recommended for use in high-humidity environments (above 80% RH). High humidity can lead to condensation, which may cause device failure or degradation. If you must operate the device in a high-humidity environment, ensure proper sealing and protection measures are in place.
    • Clean the S1087-01 using a soft, dry brush or a lint-free cloth to remove any dust or debris. Avoid using chemicals, solvents, or ultrasonic cleaners, as they may damage the device's surface or contaminate the photodiode. If you must use a cleaning solution, ensure it's specifically designed for optical components and follow the manufacturer's instructions.
    Supplyframe Tracking Pixel