Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    S1008R-103J datasheet by API Delevan

    • RF Inductors - Shielded Surface Mount Inductor - RoHS - Surface Mount - S1008R
    • Original
    • Yes
    • Yes
    • Active
    • EAR99
    • 8504.50.80.00
    • 8504.50.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    S1008R-103J datasheet preview

    S1008R-103J Frequently Asked Questions (FAQs)

    • The recommended land pattern for the S1008R-103J is a rectangular pad with a size of 2.5 mm x 1.5 mm, with a non-solder mask defined (NSMD) pad and a 0.5 mm keep-out area around the pad.
    • The S1008R-103J has a maximum operating temperature of 125°C. Ensure good airflow around the component, and consider using a thermal pad or heat sink if the ambient temperature exceeds 85°C. Also, avoid overheating during soldering and rework.
    • The S1008R-103J's self-resonant frequency (SRF) is not explicitly stated in the datasheet. However, based on similar inductors, the SRF is typically in the range of 100-200 MHz. For accurate SRF, consult with API Delevan or perform your own measurements.
    • The S1008R-103J is designed to withstand moderate vibration. However, for high-vibration environments, consider using a more robust inductor or adding additional mechanical support to ensure the component's reliability.
    • To ensure reliability in high-humidity environments, follow proper storage and handling procedures, and consider using a conformal coating or potting compound to protect the inductor from moisture.
    Supplyframe Tracking Pixel