The recommended operating temperature range for the PDV-P9008 is -40°C to 85°C. However, it's essential to note that the device's performance may degrade at extreme temperatures.
To ensure proper biasing, connect the anode to a voltage source (typically 5V) and the cathode to ground through a resistor (typically 1 kΩ). This will provide a reverse bias of around 5V, which is recommended for optimal performance.
The maximum allowable optical power density for the PDV-P9008 is 10 mW/cm². Exceeding this value may cause damage to the device.
To prevent electrostatic discharge (ESD) damage, handle the PDV-P9008 with ESD-protective equipment, such as wrist straps and mats. Also, ensure that the device is stored in an ESD-protective package when not in use.
The recommended soldering temperature profile for the PDV-P9008 is a peak temperature of 260°C, with a dwell time of 10-30 seconds. It's essential to follow the manufacturer's recommended soldering profile to prevent damage to the device.
PDV-P9008 datasheet
by Luna Optoelectronics
