PCM9211PTR datasheet by Texas Instruments

PCM9211PTR Frequently Asked Questions (FAQs)

• What is the recommended power-up sequence for the PCM9211PTR?
  The recommended power-up sequence is to apply VCC first, followed by VDD, and then the analog power supplies (VAA and VDA). This ensures that the internal voltage regulators are powered up correctly.
• How do I configure the PCM9211PTR for master clock mode?
  To configure the PCM9211PTR for master clock mode, set the MCLK pin to the desired clock frequency, and then set the MCLKDIV pin to select the clock divider ratio. The device will then generate the required clock signals for the ADC and DAC.
• What is the maximum input voltage for the analog-to-digital converter (ADC)?
  The maximum input voltage for the ADC is 2.5Vpp differential, which corresponds to 5Vpp single-ended. Exceeding this voltage may result in distortion and reduced accuracy.
• How do I optimize the performance of the PCM9211PTR in noisy environments?
  To optimize performance in noisy environments, use a low-pass filter on the analog input signals, and ensure that the device is properly grounded and shielded. Additionally, use a high-quality clock source and minimize clock jitter.
• What is the latency of the PCM9211PTR's digital-to-analog converter (DAC)?
  The latency of the PCM9211PTR's DAC is approximately 1.5 clock cycles, which corresponds to 37.5 ns at a clock frequency of 48 kHz.